Fret Work & Lace Work Restoration
Iron Restoration Melbourne

Many Melbourne homes have iron features that have been there for decades: lacework on Victorian terraces, verandah posts on Edwardian homes, and heavy front gates on older brick fences. Over time, weather and moisture cause rust, and the paint starts to bubble and peel.

If your ironwork is showing its age, All Blast can strip off the rust and old paint at your property and prepare the iron for repainting. We come to you, so there’s no need to take your gate or fence down and cart it away.

Request a Free Quote
What we restore in Melbourne
  • 1Driveway and pedestrian gates, including heavy double gates on brick piers
  • 2Front fence panels and railings
  • 3Verandah posts, brackets, lacework and balustrades (railings)
  • 4Security grilles and window bars
  • 5Decorative screens and garden ironwork
  • 6Cast iron columns and other decorative features
Driveway gates: a common Melbourne job

Older iron gates tend to rust in the same place. Rainwater sits along the bottom rail and inside hollow sections, so the rust starts on the inside and works its way out. You’ll often see the paint bubble and flake on the lower part of the gate while the top still looks fine.

Blasting removes the paint and rust so we can see the true condition of the metal. Older wrought and cast iron is quite thick, so surface rust often looks worse than it is. If a section has rusted all the way through, though, it will need to be welded or replaced by a metal fabricator before it’s painted. We’ll show you if we find this and explain your options.

 

Request a Free Quote
Motorised gates

If your gate opens automatically, let us know when you get in touch. We work around the motor and hardware, or coordinate with your gate technician to switch it off safely before we start.

Paint or powder coat: which finish suits your ironwork?

After blasting, ironwork is usually finished in one of two ways. Painting is done at your property. Powder coating is a baked-on finish applied at a factory, so the item has to be removed and transported.

Blast, prime and paint Blast and powder coat
Done at your property Yes No. The item goes to a powder coating workshop
Suits fixed or large items Yes Only if it can be removed and transported
Durability Good when the right paint system is used Very good; a harder-wearing finish
Touch-ups and repairs Easy to touch up on site Chips can be hard to match
Colour choice Very wide, including heritage colours Wide, but heritage colours can be limited
Cost Often lower for large fixed items Can be competitive for removable gates and panels

For fixed fences and verandahs, painting at your property is usually the practical choice. If your gate lifts off its hinges, powder coating is worth considering. We can blast and prepare the gate for either finish.

Why choose All Blast

All Blast restores residential and heritage ironwork around Melbourne. We do the blasting at your property and apply a primer (a protective first coat) soon after, because bare iron starts to rust again quickly once it’s exposed. We’ll also tell you before the painting stage if any section needs welding or replacing. If your home was built before 1970, the old paint may contain lead, so we follow lead-safe practices when removing it.

FAQ's

Usually not. Most gate and fence work is done where it stands, and we protect the surrounding area while we work. A gate only needs to come off if it’s going to be powder coated or welded.

Once the rust is blasted off, we can see how bad it is. If a section has rusted through, it needs welding or replacing before it’s painted. We’ll point it out and you can use your own metal fabricator, or we can suggest one.

As soon as practical. Bare iron begins to rust again quickly, so a protective primer coat goes on as part of the job.

We service Melbourne and surrounding suburbs. Send us your suburb when you enquire and we’ll confirm we can get to you.

Yes. Blasting can clean fine detail that is hard to reach by hand. We’ll check the condition of the iron first and let you know if any pieces are too far gone to restore.

Get a Melbourne quote.

Send us photos of your gate, fence or ironwork and we’ll get back to you with what’s involved and a price.

Get a Free Quote

Please submit your inquiry and one of our experts will get back shortly.