Carlton’s Victorian terraces — particularly the grand two-storey rows around Drummond Street, Canning Street and the Rathdowne Street precinct — carry some of the most elaborate cast iron lacework in Melbourne. Double-storey balconies, deep friezes, heavy balustrading and full column sets.
More of it is intact than people expect. It’s just been painted over so many times that the pattern has softened into a blur.
Request a Free QuoteOn a typical Carlton job we’ll find anywhere from six to fifteen coats. The layers tend to stack like this: original oil-based paint, decades of maintenance coats, a lead-based layer somewhere in the middle, then modern acrylics applied over the top without proper preparation. Because the later coats were applied over failing ones, they lift in sheets and trap moisture against the iron.
Blasting removes the whole stack. What emerges is usually far crisper than the owner expected — acanthus leaves, fern patterns and geometric friezes that hadn’t been legible for fifty years.
Carlton’s double-storey balconies mean most jobs here need scaffold and elevated containment rather than a ladder and a drop sheet. That’s not an upsell — a contained two-storey frontage is the only way to strip lead-bearing paint above a public footpath without putting dust into the street.
Factor scaffold into your budget from the outset. We’ll quote it transparently or coordinate with your scaffolder.
A large portion of Carlton’s terrace stock is investor-owned or student rental. Ironwork on those properties has often had the least maintenance and the most expedient paint jobs. The good news is that the castings themselves are cast iron and extremely durable — neglect usually means paint failure and surface rust, not structural loss. Blasting and recoating frequently recovers a balcony that looked beyond saving.
Request a Free QuoteMuch of Fitzroy falls within the City of Yarra’s heritage overlay. Works to original fabric visible from the street can attract planning controls. Check with Yarra before you commit to a scope — restoring original lacework is generally viewed favourably, but the process matters.
| Lead-safe contained blasting | Standard open blasting | |
|---|---|---|
| Suitable for pre-1970s painted ironwork | Yes | No |
| Dust escape to neighbours and footpath | Controlled | Uncontrolled |
| Waste handling | Coating and media collected and disposed of appropriately | Spent media and lead residue left in the environment |
| Operator protection | Full respiratory and PPE protocol | Inadequate for lead exposure |
| Method | Wet abrasive blasting suppresses lead dust at the source | Dry blasting aerosolises it |
| Cost | Higher — containment, collection, disposal | Lower upfront |
| Legal and insurance exposure for the owner | Managed | Significant |
On a Carlton terrace, this isn’t really a choice. If a quote you’ve received doesn’t mention containment or lead, ask why.
All Blast has many years of experience with Melbourne’s heritage ironwork, including multi-storey verandah and balcony restorations. We follow lead-safe practice on all pre-1970s coatings, carry many public liability cover, and provide documentation of waste handling where owners or body corporates require it.
We can coordinate it or work alongside your scaffolder. Either way it should be costed into the job from the start.
Testing is the only certainty, and kits are inexpensive. If the property is pre-1970s, we’ll work on the assumption that lead is present unless testing says otherwise.
Yes, though partial work can leave a visible difference in finish between old and new sections. We’ll show you what to expect.
Often, yes. We can supply SWMS, insurance certificates and waste disposal records on request.
Send photos of the frontage — including a close-up of the paint condition — and we’ll advise on scope.
Please submit your inquiry and one of our experts will get back shortly.